obd2tool

How to Change John Deere Speed Limit with PLD File Editor

obd2lily | 31 December, 2018 10:38

John Deere PayLoad (PLD) File Editor – this is Developer level tool, that allows you to change factory parameters in the PLD files using John Deere Service Advisor.

John-Deere-Service-Advisor-EDL-1

John Deere Service Advisor,John Deere Diagnostic Kit,John deere diagnostic software,John Deere scanner,john deere service manual,john deere edl v2,john deere edl2,John Deere Service,Advisor EDL,V2 Diagnostic Kit,Electronic Data Link v2,

With John Deere Service Advisor PLD File Encryptor/Decryptor you can:

-Decrypt PayLoad (PLD) file to txt/ini format
-Modify PLD file expiration
-Modify PLD factory options such as speed limit (for example change 40 km/h to 50 km/h)
-Adjust PLD file to different product serial
-Encrypt PLD file
-Program controller with modified PLD using Service Advisor
-Support Windows XP

Example: How to change speed limit with  pld files?

Q1:

Question about payload files:

I have pld files of my tractor (6330P) 11 in total.

I see in bottom of each files info about my tractor (option, serial number etc)

Question: My goal is up the speed limit from 40km to 50 km. I think I have to change OPTION=3 to OPTION=5, but do I have to edit each 11 pld file?

A1:
You were right about the speed limit:
you can change OPTION=3 to OPTION=4 or any other you need.
Speed_30kmh = 1;
Speed_35kmh = 2;
Speed_40kmh = 3;
Speed_50kmh = 4;
Speed_ECO = 5;
Speed_NoiseRed_OOS = 6;

For R models the line is different. ROADSPEEDLIMIT=3 change to ROADSPEEDLIMIT=5 or any other you need.

var RoadSpeedLimit_30 = “1”;
var RoadSpeedLimit_35 = “2”;
var RoadSpeedLimit_3840 = “3”;
var RoadSpeedLimit_40E = “4”;
var RoadSpeedLimit_50 = “5”;
var RoadSpeedLimit_50E = “6”;
var RoadSpeedLimit_55 = “7”;
var RoadSpeedLimit_60 = “8”;
var RoadSpeedLimit_60E = “9”;

After you change it, sometimes you still need to lift the speed manually through the display (depending on the tractor model)

You only need to reprogram transmission controller for that.
If you reprogrammed all of them, some settings might have went to default so you might get up to 5 fault codes that you need to configure with SA.

Q2:
Does it work with SA 4.2?
A2:

Service Advisor is just a tool to use pld. Pld editor works without SA.

Q3:
I have a question about trying to up the power of a 6330 to a 6430. If I compare the engine pld of both tractor they are identical (just the info in the bottom is different) So I don’t know how it could up the power if all the code is the same??

A3:
most pld files are made for various models, the info at the bottom determines which part of the pld file will be used for programming. For example:
PRODUCT_MODEL_NO=6115
PERFORMANCE_OPTION_PART_NO=R546973
FACTORY_OPTIONS=RE570443

Q4: Do you have John Deere PLD file editor for sale?

A4: Sorry, we don’t have PLD files. You can search or download from google.

Test with VAS5054A, Conclusion, Recommendation

obd2lily | 23 December, 2018 06:58

Here is my story of Odis 4.4.10.
Link: thanks to GUSS shared links at Obd2tool.com
VAS 5054A and odis 4.4.10:

One of my 2 vas5054a has original amb2300 but does not work with odis-s 4.4.10.
I get a ODS2522E that hardware is not supported. (same as the one without original amb2300)

I have tested amb2300 with softing edic configuration manager. Also tested with PDU api application. All tests ok. Configurator manager did not work with vas5054a without amb2300

vas5054a-odi-error-1 vas5054a-odi-error-2

Then, tested working PDU api and tried to solves the issue however I am not happy with the result. In theory original amb2300 should work.

Tests:
1. 1.20.41 does not work at all with either of my 2 interfaces. So back to 1.20.42
2. Enabled buzzer just to check that my amb2300 is original. Enabled.
3. Tried to connect with bluetooth (amb2300 interface). Laptop connected successfully. Tried to connect odis-s with car and started buzzing continuously and then an error appeared, buzz continued.
In English
there is no mcd project available

I am ditching odis-4.4.10.

Before 4.2.3 test will test 4.3.3 to check if that works, in order to check if the problem is hardware or software.

vas5054a-odi-error-3

Then i was advised to make another folder Softing.ori  put ther new Pdu:

vas5054a-odi-error-4 vas5054a-odi-error-5

vas5054a-odi-error-6 vas5054a-odi-error-7 vas5054a-odi-error-8

Did not work but good try. That made me think that PDU API is the problem.

However found out that VW has locked the D-PDU API directory location (or file names) and managed to install at the 1.20.042 location the 1.20.041 pdu api and renamed 3 files to …..1.20.042 (2 xml 1 dll same as DPDU api test application 3 files mentioned).

now it works, actually tested just vas5054a with fake bluetooth and works.

This is not a straight forward procedure, however after manipulation of D-pdu api (1.20.042 vecom, the 3 files) odis 4.4.10 works.

My amb2300 is original since I have downgraded it to 1.20.041 firmware (with the D-PDU API) test application) however it does not work out of the box with odis 4.4.10. Will test the second one tomorrow.

My conclusion:

First, that pdu api directory (file name) is locked.

Second, amb2300 original does  not work as tested. (problem with 1.20.042 pdu API driver specifically Softing/1.20.042/VeCom/VAS5054a files as seen in second solution below).

Other solutions:
1. Test the PDU API 1.20.042 found in odis 4.3.3 (check pdu_api_root.xml is correct 1.20.042)
2. Want to test original 1.20.042 but to replace in vecom vas5054 folder from 1.20.041 folder. (No other changes, check again pdu_api_root.xml is for 1.20.042 )

Test performed:
1. Tested second vas5054a with original amb2300. All tests with usb and bluetooth pass with first solution above. Note in this test I used amb2300 firmware 1.20.041 since I used pdu api 1.20.041 renamed folder to 1.20.042 and 3 files to 1.20.042 as discussed above. Bluetooth works too.

2. Second solution tested with original amb2300. (not tested with clone but most probably will work)
b) reinstall pdu api 1.20.042 pdu api
b) Replace vas5054 folder (from 1.20.041) in softing/1.20.042/vecom/vas5054.
c) update amb2300 firmware to 1.20.042 (this is the difference from solution 1) since I used pdu api 1.20.042.
d) Both usb and bluetooth work. Amazing… I have original amb2300 (but with fake serial number).

vas5054a-odi-error-9

Recommendation:

The files are full

No need search for launcher, license…and NEVER expired

It’s tested 100% by real pros and confirmed to work no issues

Also, remote help can be got if you have any issue of installation

No access authorzation code! you must contact the User Help Desk

obd2lily | 16 December, 2018 04:47

When you see those errors please don’t worry! just contact us directly if you don’t know!
Please don’t make dispute if the reason is for one of those error!

1. MB Star software need to be activated! if you don’t know how to activate,  please send teamviewer ID & password!

mb-star-c4-error-1

2. Das need to be activated! Please send teamviewer ID and passwords with photo of HDD to us!

mb-star-c4-error-2

3. Normal error! please make sure device connect well! IP setting correctly! choose the right car model. or maybe not support your cars. if did all in a right way, error shows the same, please attach us picture and run teamviewer for us.

mb-star-c4-error-3

4. Need connect devices to car then can enter DTS! if not connect to car then appear this error!

mb-star-c4-error-4

VAG OBD Helper Software

obd2lily | 09 December, 2018 01:01

VAG OBD helper 4th Immo Data Calculator free download source and installation guide.

VAG OBD helper free download source:

https://mega.nz/#!gZJzTKTC!BTVJqa-SmWgrwbd-n0vV8r2glx23d3l2OpN3ZRu1gXU

Download the above link on the desktop.

Decompress it.

vag-helper-installation-1

Install the driver firstly, then use the USB port to connect the device.

vag-helper-installation-2

Open the software, you will see the serial number read by the cable, the language is Chinese and English.

vag-helper-installation-3
vag-helper-installation-4

There are some pdf files in Chinese on how to use VAG OBD helper to read out the 4th IMMO data and then use the key programmer to program key.

vag-helper-installation-5

VAG OBD helper Token:

Each time the user read out the IMMO data, it will cost one token. Usually the VAG OBD helper comes with one free token FROM www.obd2tool.com, after it use up, just send the supplier serial number to charge more.

CAT ET 3 Truck Diagnostic Tool Heavy Duty Wi-Fi Adapter CAT et3 Wifi Version

obd2lily | 01 December, 2018 22:17

cat-et3-1

Description:
Caterpillar ET3 Adapter III 317-7485 is the latest generation of the CAT Communication Adapter group,and replaces the CAT Comm Adapter II. This is the only recommended communication device for CAT,and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks. This function is needed for some CAT ET (Electronic Technician) functions.

Function:
1.Display “Logged Event Codes” to show engine over speeds,High temperatures, fuel consumption, etc.
2.View ECM’s current configuration and change user settings
3.Perform diagnostic tests and calibrations, and calibrate
4.Electro-mechanical and electro-hydraulic components
5.Context sensitive help leads operator through every task Cat ET can perform
6.Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.
Functionalities Shows all operating conditions that cause high repair costs such as:
Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator Cat “ET Trainer” is now included in ET Program. It allows Users to train and practice using Heavy Duty Truck Scan Tool Cat ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of Cat ET.

Communication:
1. Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks
2. Flash program allows adapter firmware upgrades as additional features become available
3. Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

Specification:
1.ECM Summary screen lists every control module on equipment
2.Being tested and gives information on these modules.
3.Fast hookup and real time display of systems status. Displays ,readings such as rpm, boost, pressures, temperatures, etc. for Easy troubleshooting.
4.Identifies faulty sensors, harness connectors, and system parameters which are out of specification. Allows customers
5.To help dealer identify problems without visiting machine.
6.Identifies intermittent sensors and wiring problems during Machine operation and keeps a record of each one. Showswhen problem occurred and how often it happened.
7.Added information to allow customer to assist dealer in diagnosing and repairing problems. (Troubeshooting Help is not built in with in the program, you will still need go back to books in order to follow a repair description and steps in each Fault Code display within the program).English and metric units of measure integrated help file to easy learn the “How To” around the software.

www.obd2tool.com

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6